We switched from plastic treads to rubber treads to increase our traction.
Jacob and Ryan’s Ramp Climber
Ramp Climbing Car
Goal: Build a car that can climb as steep a ramp as possible. Film or photograph your car climbing the ramp and tell us the steepest angle in degrees that you were able to climb.
Start Date: January 1st, 2018
Due Date: January 31st, 2018
Rules: You may use a MINDSTORMS EV3 kit, an NXT kit, or a LEGO BOOST kit. You are also welcome to use multiple kits, additional LEGO pieces, third-party sensors, and non-LEGO materials.
Kate and Natalie’s Ramp Climber
We added two weighted bricks to the front of our car to keep it from tipping backward.
Ramp Climbing Car
This car that I have made can climb a ramp of about 55 to 60 degrees. It consists of two motors and no sensors. The speed of the car it changeable using the top and bottom buttons on the brick The problem with my car, is grip. The car can climb most angles if it […]
Christian and Henry’s Ramp Climber
We used gears to power all four wheels.
Calla and Noa’s Ramp Climber
Our robot, Helga, is designed to have a low center of gravity.
Oscar and Zane’s Ramp Climber
We extended our front wheels in front of the EV3 to help keep the car from veering.
Augie and Indi’s Ramp Climber
We designed our car to have a low center of gravity.
Evan and Ozan’s Ramp Climber
We added a weighted brick to our car to improve its grip on the ramp.
Rory’s ramp climbing car
The car would not drive up so i tried adding a few small wheels in the front and back.The wheels helped my car drive up the ramp at a 60 degree angle.
Ramp Climbing 1
ramp climber 1 This is our ramp climbing car. We started off with building for torque but soon realized that, Torque is not the only thing, we needed weight distribution as well as ability to keep the driving wheels on the surface so that the power can be transfered to the surface. This is were […]
Ramp climbing car
My ramp climbing car climbed 75 degrees